NORMALLY OPEN VALVES - SPECIFICATIONS
ABOUT US
PRODUCTS
DOWNLOAD
CONTACT US
FEEDBACK
HOME
PRODUCT CATOGORIES
Specifications General
FOR MORE INFORMATION CONTACT US :
3711/A,GIDC,PHASE-IV,vatva
,
Ahmedabad-382445.
Phone:
+91-79-25842503
,
+91-79-2584 0845,
Email:
info@giplindia.com
Home
»
Water Valve
»
NORMALLY OPEN VALVE
»
Specification For "NO" VALVE
»
Specification General
Specifications for NORMALLY OPEN Solenoid Valves
Specifications for normally open solenoid valves for water.
Sr.No
PARAMETER
DESCRIPTION
1.
Connector
Horizontal Spade, 6.3 x 0.8 mm
2.
Electric Rating
12 V DC / 24 V AC / 24 V DC / 36 V DC / 48 V DC / 110-120 V AC / 220-240 V AC
(for AC 50 / 60 Hz.)
3.
Current
10 W / 8 VA
4.
Insulation Class
`F', 155° C.
5.
Insulation resistance
Over 500 M Ohms
6.
Solenoid Temperature Rise
Under 95° C. at 35° C. ambient.
Sr. No.
PARAMETER
DESCRIPTION
1.
Suitable Fluid
Water
2.
Ambient Temp.
45° C. max.
3.
Fluid Temp.
90° C max.
4.
Operating Pressure
0.2 to 5 bar
5.
Inlet Connection
Model dependent check
here
6.
Outlet Connection
Model dependent check
here
7.
Burst Pressure
15 bar minimum.
8.
Water Leakage
No leakage from 0.2 bar to 5 bar
9.
Water Flow Rate
5-30 LPM, Model dependent
10.
Operating Rate
100% @ 30° C. Ambient, 3 Min On/ 5 Min Off @ 45° C Ambient 90° C Water
11.
Life
More than 500,000 cycles.
Note:
All dimensions are in MM, unless specified
Copyright © General Imsubs Pvt. Ltd. All Rights Reserved
